Genuine VAG 2.0TFSi Fuel Pump Cam Follower Replacement Kit

Genuine VAG 2.0 TFSi Fuel Pump Cam Follower Replacement Kit

The high pressure fuel pump in the 2.0 TFSi engine can be affected by excessive wear of the cam lobe and the follower that drive the pump. As of 2006 all 2.0TFSI's have harder cam lobes.

 This issue is not only an issue on remapped or modified engines but can also be found on completely standard set ups. This affects the OE fuel pump and all versions of aftermarket up-rated fuel pumps. This issue is not a direct result of remapping. However, extended periods at very high RPM, such as aggressive track day driving can cause rapid deterioration.

The recommendation is that an inspection of the cam follower is done at each service interval/10,000 miles (on a standard engine). For vehicles that have been re-mapped and/or have an uprated fuel pump then an inspection every 5,000 miles is suggested whilst cars that are used for track days should be inspected after each event.

This issue is more prevalent on some aftermarket high pressure fuel pump kits than others, however all OE and aftermarket TFSi fuel pumps are affected by this issue.

This kit includes the following genuine parts:

• High Pressure Fuel Pump Cam Follower (06D109309J)
• T30 Torx Fuel Pump Mounting Bolts - x3 (N10624701)
• Fuel Pump Sealing O-Ring (WHT005184)

* IMPORTANT PLEASE PROVIDE REGISTRATION WHEN ORDERING THIS CAN BE ADDED IN THE CUSTOMER COMMENT SECTION*