Menu
Your Cart

VIS Motorsport High Pressure Fuel Pump Upgrade Kit 2.0TFSi - EA113

VIS Motorsport High Pressure Fuel Pump Upgrade Kit 2.0TFSi - EA113
VIS Motorsport High Pressure Fuel Pump Upgrade Kit 2.0TFSi - EA113
VIS Motorsport High Pressure Fuel Pump Upgrade Kit 2.0TFSi - EA113
£350.00
Exc VAT: £291.67
  • Stock: In Stock
  • Model: VISEA113S1

Available Options

VIS Motorsport High Pressure Fuel Pump Upgrade Kit 2.0TFSi - EA113 - VISEA113S1

 

Please select above using the drop-down menu whether you require this pump to be fitted into a Brand New Genuine Fuel Pump or whether you would like the internals on their own. We can also supply a brand new Genuine/OEM Cam Follower with the internals using the dropdown options.

 

Modification of the 2.0TFSi EA113 engines far beyond OEM power levels requires an additional volume of high-pressure fuel to avoid "fuel cuts" especially in the midrange. In many cases we see the factory fuel pump begin to suffer from pressure loss.

 

The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump. This upgrade replaces the internal parts that are responsible for pressure and volume of fuel that reaches your injectors to meet the demands that come for higher power.

 

Tolerances involved - The final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands.

 

The tolerances between the piston and the new sleeve the piston rides in can only be measured by a machine which uses air volumes to measure the part clearances to within microscopic levels.

CMM coordinate measuring machine is a device for measuring the physical geometrical characteristics of an object and used here with success.

 

Features:

 

The piston has over than 55% - 75% area over OEM

 

The piston head is optimized for ideal fuel flow direction

 

Piston surface is hardened and heat treated in 3 different stages

 

Uses OEM-style spring keeper, not a higher rated one that will prematurely wear the cam follower

  

Even a standard stock or Stage 1 car will see benefits from running these internals. They can sustain easy 600 hp, over 175 bar if hardware setup allow!

 

Laser marked for better traceability and protecting from fake / replica products.

Pump housing O ring made of Viton

Not only does the upgrade increase the amount of fuel your high pressure fuel pump can deliver but it will also decrease the duty cycle of the N276 solenoid on your pump. Lowering the duty cycle of the N276 will extend the life of this solenoid, an item that commonly fails on these pumps but isn't available separately.

 

Please note – Do NOT fit these internals into a HPFP that has just been removed from a running vehicle. This will cause seizing of the internals from the heat difference between a hot pump and cold internals!

Write a review

Note: HTML is not translated!
Bad Good

Delivery Options

All delivery information is based on shipping within the United Kingdom. For orders outside the UK, please email us at info@pipautomotive.co.uk with specific details to allow us to quote for delivery and lead times.

How does it work?

Initially, you will send us your injectors at your own cost. We recommend that you send them with a carrier that provides insurance in the unlikely event that they are lost in transit.

Once your injectors are finished, we will send them back to you using a next day special delivery service. This charge is £12 inc VAT.

EA113 High Pressure Fuel Pump Collet and Seal
EA113 High Pressure Fuel Pump Collett and Seal. The first sign of this component failing is fuel contaminating the oil. This collett saves the expense..
£60.00
Exc VAT:£50.00
Genuine VAG 2.0 TFSi Fuel Pump Cam Follower
Genuine VAG 2.0TFSi Fuel Pump Cam Follower - 06D109309JThe high pressure fuel pump in the 2.0 TFSi engine can wear out over time because the pump..
£44.16
Exc VAT:£36.80
Genuine VAG 2.0TFSi Fuel Pump Cam Follower Replacement Kit
Genuine VAG 2.0 TFSi Fuel Pump Cam Follower Replacement KitThe high pressure fuel pump in the 2.0 TFSi engine can be affected by excessive wear of the..
£66.78
Exc VAT:£55.65
Genuine VAG N80 Purge Valve For 2.0 TFSI EA113
Genuine VAG N80 Purge Valve For 2.0 TFSI EA113 - 06E906517AThis purge valve (Also known as N80 valve) sits near the manifold on the 2.0 TFSI EA113 and..
£53.40
Exc VAT:£44.50
Genuine VAG TFSi High Pressure Fuel Pump - EA113
Genuine VAG TFSi High Pressure Fuel Pump - EA113 - 06F127025MThis High Pressure Fuel Pump is a Genuine/OEM replacement Unit for the 2.0TFSi ..
£396.00
Exc VAT:£330.00